.png "LeftBanner 1")
The Rotaro freewheel clutch is an indispensable safety device, specifically designed to protect the tractor's transmission and implement from the effects of inertia. This clutch, essential on machines with high rotating masses (such as heavy shredders or mowers), allows the implement to continue rotating freely and decelerate gradually once the tractor's Power Take-Off (PTO) is disengaged. Without a Rotaro freewheel clutch, the inertia would cause a destructive "kickback" on the transmission. Choosing an original Rotaro component guarantees the correct calibration and mechanical resistance needed to absorb these loads, preventing costly failures and increasing operational safety.
Freewheel clutch for R20 series driveline shafts. Designed to withstand a maximum torque of 2400 Nm. It features a 1 3/8” (6 spline) profile connection with right-hand rotation. The product requires regular maintenance and has a net weight of 3.48 kg.
Freewheel clutch for R30 series driveline shafts. Designed to withstand a maximum torque of 2400 Nm. It features a 1 3/8” (6 spline) profile connection with right-hand rotation. The product requires regular maintenance and has a net weight of 3.60 kg.
Freewheel clutch for R30 series driveline shafts. Designed to withstand a maximum torque of 2400 Nm. It features a 1 3/8” (6 spline) profile connection with left-hand rotation. The product requires regular maintenance and has a net weight of 3.60 kg.
Freewheel clutch for R50 series driveline shafts. Designed to withstand a maximum torque of 3800 Nm. It features a 1 3/8” (6 spline) profile connection with right-hand rotation. The net weight of the product is 4.98 kg.
Freewheel clutch for R50 series driveline shafts. Designed to withstand a maximum torque of 3800 Nm. It features a 1 3/8” (6 spline) profile connection with left-hand rotation. The net weight of the product is 4.98 kg.
Freewheel clutch for R60 series driveline shafts. Designed to withstand a maximum torque of 3800 Nm. It features a 1 3/8” (6 spline) profile connection with right-hand rotation. The net weight of the product is 5.48 kg.
Freewheel clutch for R60 series driveline shafts. Designed to withstand a maximum torque of 3800 Nm. It features a 1 3/8” (6 spline) profile connection with left-hand rotation. The net weight of the product is 5.50 kg.
Freewheel clutch for R70 series driveline shafts. Designed to withstand a maximum torque of 3800 Nm. It features a 1 3/8” (6 spline) profile connection with right-hand rotation. The net weight of the product is 5.34 kg.
Freewheel clutch for R80 series driveline shafts. Designed to withstand a maximum torque of 3800 Nm. It features a 1 3/8” (6 spline) profile connection with right-hand rotation. The net weight of the product is 5.33 kg.
Freewheel clutch for R90 series driveline shafts. Designed to withstand a maximum torque of 3800 Nm. It features a 1 3/8” (6 spline) profile connection with right-hand rotation. The net weight of the product is 7.04 kg.
Italiano
English
Español
